BS EN 1825-1-2004 油脂分离器 第1部分_设计、性能和试验以及标记和质量控制的准则
|
ID： |
C65FF55BA1AC4FCAB900F9676CC599EA |
|
文件大小(MB)： |
0.45 |
|
页数： |
54 |
|
文件格式： |
|
|
日期： |
2009-10-29 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,1825-1:2004,Grease separators —,Part 1: Principles of design,performance and testing,marking and quality control,The European Standard EN 1825-1:2004 has the status of a,British Standard,ICS 13.060.99, ,Copyright European Committee for Standardization,Provided by IHS under license with CEN,No reproduction or networking permitted without license from IHS Not for Resale,--`,,,``,-`-`,,`,,`,`,,`---,BS EN 1825-1:2004,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee on,11 February 2005,. BSI 11 February 2005,ISBN 0 580 45443 6,National foreword,This British Standard is the official English language version of,EN 1825-1:2004.,In line with the consistent United Kingdom position during the development of,this Standard, the UK recorded opposition to the proposal at CEN Formal Vote,Stage.,The technical reasoning behind the response is that the test arrangements are,based on the use of light liquids rather than grease.,The testing therefore, does not take account of temperature effects or the,resistance to blockage or clogging that occurs to Grease Separators in the field.,The UK participation in its preparation was entrusted by Technical Committee,B/505, Waste water engineering, to Subcommittee B/505/8, Separators, which,has the responsibility to:,A list of organizations represented on this subcommittee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep the,UK interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 50, an inside back cover and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,Copyright European Committee for Standardization,Provided by IHS under license with CEN,No reproduction or networking permitted without license from IHS Not for Resale,--`,,,``,-`-`,,`,,`,`,,`---,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 1825-1,September 2004,ICS 13.060.99,English version,Grease separators - Part 1: Principles of design, performance,and testing, marking and quality control,Séparateurs à graisses - Partie 1 : Principes pour la,conception, les performances et les essais, le marquage et,la ma顃rise de la qualité,Abscheideranlagen für Fette - Teil 1: Bau-, Funktions- und,Pr黤grunds鋞ze, Kennzeichnung und Güteüberwachung,This European Standard was approved by CEN on 1 July 2004.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2004 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 1825-1:2004: E,Copyright European Comm……
……